History Of Development

The 19th century saw increasing research with evacuated tubes, such as the Geissler and Crookes tubes. Scientists who experimented with such tubes included Eugen Goldstein, Nikola Tesla, Johann Wilhelm Hittorf, Thomas Edison, and many others. These tubes were mostly for specialized scientific applications, or were novelties, with the exception of the light bulb. The groundwork laid by these scientists and inventors, however, was critical to the development of vacuum tube technology.
Though the thermionic emission effect was originally reported in 1873 by Frederick Guthrie, it is Thomas Edison's 1883 investigation of the "Edison Effect" that is more often mentioned. Edison promptly patented what he found, but he did not understand the process.

Information From Wikipedia

Vacuum Tube Explaination

Explanation
A vacuum tube consists of arrangements of electrodes in a vacuum within an insulating, temperature-resistant envelope. Although the envelope is classically glass, power tubes often use ceramic and metal. The electrodes are attached to leads which pass through the envelope via an air tight seal. On most tubes, the leads are designed to plug into a tube socket for easy replacement.
The simplest vacuum tubes resemble incandescent light bulbs in that they have a filament sealed in a glass envelope which has been evacuated of all air. When hot, the filament releases electrons into the vacuum: a process called thermionic emission. The resulting negatively-charged cloud of electrons is called a space charge. These electrons will be drawn to a metal plate inside the envelope, if the plate (also called the anode) is positively charged relative to the filament (or cathode). The result is a flow of electrons from filament to plate. This cannot work in the reverse direction because the plate is not heated and does not emit electrons. This very simple example described can thus be seen to operate as a diode: a device that conducts current only in one direction. The vacuum tube diode conducts conventional current from plate (anode) to the filament (cathode); this is the opposite direction to the flow of electrons (called electron current).
Vacuum tubes operate primarily on the function of the heat gradient difference between the hot cathode and the cold anode. Because of this operating requirement, vacuum tubes are inherently power-inefficient; enclosing the tube within a heat-retaining envelope of insulation would allow the entire tube to reach the same temperature, resulting in electron emission from the anode that would counter the normal one-way current flow. Because the tube requires a vacuum to operate, convection cooling of the anode is typically not possible. Instead anode cooling occurs primarily through black-body radiation and conduction of heat to the outer glass envelope via the anode mounting frame. Cold cathode tubes do exist but are used primarily in lighting systems, where unidirectional power regulation is not the functional purpose of the tube.[citations needed]
The vacuum tube is a voltage-controlled device, with the relationship between the input and output circuits determined by a transconductance function. The solid-state device most closely analogous to the vacuum tube is the JFET, although the vacuum tube typically operates at far higher voltage (and power) levels than the JFET.

Information From Wikipedia

Vacuum Tube

In electronics, a vacuum tube, electron tube (inside North America), thermionic valve, or just valve (elsewhere, especially in Britain), is a device used to amplify, switch, otherwise modify, or create an electrical signal by controlling the movement of electrons in a low-pressure space, often tubular in form. Many devices called vacuum tubes are filled with low-pressure gas: these are so-called soft valves (or tubes); as distinct from the hard vacuum type, which have the internal gas pressure reduced as far as possible. Almost all depend on the thermal emission of electrons, hence thermionic. This temperature dependence distinguishes them from solid-state devices, which require no initial warm-up period.
Vacuum tubes were critical to the development of electronics technology, which drove the expansion and commercialization of radio broadcasting, television, radar, high fidelity sound reproduction, large telephone networks, modern types of digital computer, and industrial process control. Some of these applications pre-dated electronics, but it was electronics that made them widespread and practical; electronics have driven mechanical computers such as slide-rules to the point of obsolescence.
For most purposes, the vacuum tube has been replaced by solid-state semiconductor devices such as transistors and solid-state diodes: for most applications, they are smaller, more efficient, more reliable, and cheaper—either as discrete devices or as integrated circuits. However, tubes are still used in specialized applications: for engineering reasons, as in high power radio frequency transmitters; or for their aesthetic appeal, as in modern audio amplification. Cathode ray tubes are still used as display devices in television sets, video monitors, and oscilloscopes, although they are being replaced at various rates by LCDs and other flat-panel displays. A specialized form of the electron tube, the magnetron, is the source of microwave energy in microwave ovens and some radar systems.

Information From Wikipedia